printer connect to Wi-Fi Archives | Page 3 of 5 | Printer Support Phone Number UK

16Aug, 2023

How do I reset my Canon Pixma printer?

The process to reset a Canon PIXMA printer can vary depending on the specific model you have. However, there’s a general method that you can try:

Power Off: Ensure that your printer is turned off.

Hold the Stop/Reset Button: Locate the “Stop” or “Stop/Reset” button on your printer’s control panel. Press and hold this button.

Power On the Printer: While holding the “Stop/Reset” button, press and hold the power button to turn the printer on. Keep holding the “Stop/Reset” button as you do this.

Continue Holding: After turning on the printer, continue holding the “Stop/Reset” button for about 5-10 seconds. You might see the printer’s lights or display panel flash or change during this time.

Release the Button: After the time has passed, release the “Stop/Reset” button. The printer might show some initial startup messages or lights.

Navigate Menus (If Necessary): Depending on your printer model, you might need to navigate through the control panel menu using arrow buttons or other controls. Look for a “Reset” or “Factory Reset” option. If you find such an option, select it using the appropriate buttons and follow the prompts to confirm the reset.

Power Cycle: Once the reset is complete, turn off the printer and unplug it from the power source for about 10-15 seconds. Then plug it back in and turn it on.

Please note that the exact steps and button names can vary based on your specific Canon PIXMA printer model. If you’re not sure about the steps for your printer, I recommend referring to your printer’s user manual. The manual should provide detailed instructions on how to perform a reset or factory reset for your specific model.

Additionally, keep in mind that performing a factory reset will often erase personalized settings and configurations, so you might need to set up your printer again after the reset. If you’re still unsure about the process, you can also reach out to Canon printer technical support UK for assistance.

16Aug, 2023

How do I clear the error message on my Canon printer?

Clearing error messages on a Canon printer can vary depending on the specific error you’re encountering. However, here are some general steps you can follow to try and clear common error messages:

Check the Display Panel: Your Canon printer should have a display panel that shows the error message. Make sure you read and understand the error message displayed. It might give you a clue about what’s wrong.

Power Cycle: Sometimes, errors can be cleared by simply turning off the printer, waiting for a few seconds, and then turning it back on. This can reset the printer’s internal components.

Check for Paper Jams: If the error message indicates a paper jam, carefully open the printer and check for any jammed paper. Gently remove any paper you find, making sure not to tear it.

Check Ink or Toner Levels: If the error message is related to ink or toner levels, check to see if any cartridges are low or empty. Replace them if necessary.

Reset or Restart: Some Canon printers have a reset option in their settings menu. You might be able to find this in the printer’s control panel or through the printer’s software on your computer.

Canon printer technical support UK

Update Firmware/Drivers: Outdated firmware or drivers can sometimes cause errors. Visit Canon’s official website and check for any available updates for your printer model.

Perform a Hard Reset: For more persistent issues, you might need to perform a hard reset. This usually involves holding down certain buttons on the printer while turning it on. Refer to your printer’s manual for specific instructions on how to perform a hard reset for your model.

Inspect for Obstructions: Check if there are any foreign objects obstructing the printer’s mechanisms. This can include pieces of paper, debris, or even small objects that have accidentally fallen into the printer.

Contact Customer Support: If you’ve tried all the above steps and the error persists, it might be best to contact Canon printer technical support UK. They can provide specific troubleshooting steps for your printer model and help you further diagnose and resolve the issue.

Remember that the steps to clear error messages can differ between different Canon printer models. It’s always a good idea to consult your printer’s manual or Canon’s official support resources for detailed instructions tailored to your specific printer model.

12Aug, 2023

How do I fix my HP printer error code?

HP printer error code can indicate a variety of issues with your printer. The steps to fix the error code will depend on the specific error you’re encountering. Here are some general troubleshooting steps you can follow:

Check the Error Code: Look up the specific error code on the HP website or in your printer’s user manual. This will give you more information about the nature of the problem and potential solutions.

Restart the Printer: Sometimes, errors can be resolved by simply turning the printer off, waiting a few seconds, and then turning it back on.

Check for Paper Jams: Paper jams are a common cause of printer errors. Open all access doors and trays and carefully remove any stuck paper. Make sure to follow the manufacturer’s guidelines for clearing paper jams.

Check Ink or Toner Levels: If your error code relates to ink or toner. Ensure that your printer cartridges have enough ink or toner to complete the print job. If not, replace or refill the cartridges.

Read Also: What is error 13 A2 D2 on HP printer?

Update or Reinstall Drivers: Outdated or corrupt printer drivers can lead to errors. Visit the HP website to download and install the latest drivers for your printer model.

Check for Firmware Updates: Printer firmware updates can also fix bugs and errors. Visit the HP website and search for firmware updates for your printer model.

Clear Print Queue: If you’re encountering errors when sending print jobs, there might be a print job stuck in the queue. Clear the print queue and try printing again.

Perform a Power Cycle: Turn off the printer, unplug it from the power source, wait a minute or two, and then plug it back in and turn it on. This can help reset the printer’s internal components.

Check for Obstructions: Make sure there are no foreign objects or debris inside the printer that could be causing the error.

Check Connectivity: If the printer is connected to your computer via a cable, ensure that the cable is properly connected. If using a networked printer, check the network connection.

Perform a Factory Reset: As a last resort, you might need to perform a factory reset on the printer to clear any persistent errors. Refer to your printer’s manual for instructions on how to do this.

If you’re still unable to resolve the HP printer error code can indicate a variety of issues with your printer. The steps to fix the error code will depend on the specific error after trying these steps. It might be a good idea to contact HP’s customer support or consult their online support resources for further assistance. They can provide guidance specific to your printer model and the error code you’re encountering.

11Aug, 2023

What is error 13 A2 D2 on HP printer?

Error 13 A2 D2 codes you’ve provided, “13 A2 D2,” do not correspond to any widely recognized error codes for HP printers up to that point. HP printer error codes can vary depending on the model and specific issue you’re encountering.

To troubleshoot the issue, I recommend the following steps:

Check the Manual: Consult the user manual or documentation that came with your HP printer. It might contain a list of error codes and their explanations.

Online Resources: Visit the official HP support website for your specific printer model. They often provide a comprehensive list of error codes along with suggested solutions.

Power Cycle: Sometimes, simple issues can be resolved by turning off the printer, and unplugging it from the power source. Waiting for a minute or two, and then plugging it back in and turning it on.

Check for Jammed Paper: Ensure that there are no paper jams or obstructions in the paper path. Even a small piece of torn paper can trigger an error.

Update Firmware/Drivers: Ensure that you have the latest firmware and drivers installed for your printer. Outdated software can sometimes lead to errors.

Reset Printer: Depending on your printer model, there might be a way to perform a factory reset or a partial reset. Be cautious with this step as it can reset settings and remove network configurations.

Contact HP Support: If you’re unable to find a solution, reach out to HP printer technical support. Provide them with the specific error code and any relevant information about your printer model and the situation in which the error occurred.

Check for Hardware Issues: If none of the above steps work, there might be a hardware issue. If your printer is under warranty, consider contacting HP for repairs or replacement.

Remember that error codes can change with updates or new printer models. So it’s essential to refer to the most recent documentation or resources for accurate information.

7Aug, 2023

How do I fix the error message on my Brother printer?

Fixing an error message on your Brother printer can vary depending on the specific error code or message you are encountering. Here are some general steps you can follow to troubleshoot and resolve common printer errors:

Check the Error Message: Read the error message displayed on the printer’s screen or the error code number (if applicable). Understanding the specific error will help you identify the problem and find a solution.

Restart the Printer: Sometimes, errors can be caused by temporary glitches. Turn off the printer, unplug it from the power source, wait for a few seconds, and then plug it back in and power it on again.

Inspect for Paper Jams: Paper jams are a common cause of errors. Open all accessible covers and check for any stuck paper. If you find any, gently remove it without tearing it.

Check Ink or Toner Cartridges: Ensure that your ink or toner cartridges are correctly installed and have sufficient ink or toner levels. Replace any empty or low cartridges if needed.

Verify Connectivity: Make sure your printer is correctly connected to your computer or network. Check the cables and wireless connections to ensure they are properly set up.

Brother printer technical support UK

Update Printer Drivers and Firmware: Outdated drivers or firmware can lead to errors. Visit the Brother website and download the latest drivers and firmware for your printer model.

Perform a Factory Reset (optional): If other troubleshooting steps don’t work, you can try performing a factory reset on the printer to restore it to its default settings. Note that this step will erase any custom settings you’ve made.

Consult the User Manual: Refer to the printer’s user manual for specific troubleshooting steps related to the error you are encountering. The manual will have dedicated sections for common errors and how to resolve them.

Contact Brother Support: If the error persists and you cannot find a solution on your own, contact Brother’s customer support for further assistance. They may be able to guide you through specific troubleshooting steps based on your printer model and the error message.

Always follow the manufacturer’s guidelines and avoid attempting complex repairs unless you have experience and knowledge in printer maintenance. Some issues may require professional assistance to avoid further damage to the printer.

7Aug, 2023

What is the common error in Brother printers?

Brother printers, like any other printers, can encounter various errors depending on the model and usage. Some of the common errors experienced by Brother printer users include:

Paper jams: Paper getting stuck inside the printer is one of the most frequent issues. This can happen due to misaligned paper, overloading the paper tray, or using damaged paper.

Ink or toner cartridge issues: Problems with ink or toner cartridges can result in error messages indicating low ink levels, incompatible cartridges, or poor print quality.

Connectivity issues: Brother printers can experience connectivity problems. Such as being unable to connect to the computer or network, leading to printing failures.

Firmware or driver errors: Outdated or corrupt printer drivers and firmware can cause printing issues and error messages.

Print quality problems: Users may encounter issues like blurry prints, streaks, or faded text due to issues with printheads or low-quality ink/toner.

Unable to print from mobile devices: If you are unable to print from your smartphone or tablet using Brother’s mobile printing features. It may be due to network or software configuration problems.

Error codes: Brother printers may display specific error codes like “Error 50,” “Error 76,” or “Error 51,” which can indicate particular issues with the printer hardware or software.

Offline status: Sometimes, Brother printers may appear offline, even when they are connected and powered on, causing printing problems.

To address these common issues, you can try the following troubleshooting steps:

Check for paper jams and remove any stuck paper carefully.
Verify that the ink or toner cartridges are correctly installed and have sufficient ink/toner.
Ensure the printer is connected properly to your computer or network.
Update the printer drivers and firmware to the latest versions.
Check the printer settings and adjust them if necessary for better print quality.
Ensure that the printer is not in sleep or offline mode.

If you encounter persistent issues or encounter error codes that you are unsure how to resolve. It’s best to consult Brother’s official support resources. Including their website and customer support, for specific troubleshooting guidance for your printer model.

7Aug, 2023

How do I clear errors on my HP printer?

Clearing errors on your HP printer involves a few steps, depending on the specific error message displayed on the printer or the computer. Here’s a general guide on how to clear errors on an HP printer:

Check Error Message: First, identify the specific error message or code displayed on the printer’s control panel or the computer screen. This will help you understand the nature of the error and how to proceed with troubleshooting.

Restart the Printer: The simplest and often effective method is to turn off the printer, unplug it from the power source, wait for about 30 seconds, and then plug it back in. Turn on the printer to see if the error clears.

Update Printer Firmware: Outdated firmware can sometimes cause errors. Check HP’s official website for any available firmware updates for your printer model. Download and install the latest firmware following the manufacturer’s instructions.

Clear the Print Queue: If the error is related to a print job. Open the print queue on your computer and delete all pending print jobs. This can resolve issues caused by corrupted print jobs.

Check for Paper Jams: Open all accessible areas of the printer and carefully remove any stuck paper. Be sure to follow the printer’s instructions and guidelines while doing this.

Check Ink or Toner Levels: If the error is related to low ink or toner, check the printer’s control panel or the printer software on your computer to see the ink or toner levels. If necessary, replace low or empty cartridges with genuine HP cartridges.

Perform a Hard Reset: A hard reset can help in clearing internal errors. The process varies depending on your specific printer model. Refer to the printer’s manual or HP’s support website for instructions on how to perform a hard reset.

HP printer support phone number

Run Diagnostic or Troubleshooting Tools: Some HP printers come with built-in diagnostics. troubleshooting tools that can help identify and resolve errors. Access these tools through the printer’s control panel or the HP software installed on your computer.

Check for Hardware Issues: If none of the above steps work, there may be a hardware problem causing the error. Contact HP customer support or a professional technician to diagnose and resolve any hardware-related issues.

Remember that the steps to clear errors may vary depending on your specific HP printer model and the nature of the error. Always refer to the printer’s manual or HP’s official support resources for accurate troubleshooting steps. If you encounter any difficulties or are unsure about any step. Seeking assistance from HP support or a qualified technician is recommended.

7Aug, 2023

HP Printer Error Code 30

HP Printer Error Code 30 is a common error that can occur on HP printers. This error is usually related to a problem with the printer’s ink or toner cartridges. Here are some steps you can take to troubleshoot and resolve the error:

Error Code 30

Check Cartridge Installation: Ensure that the ink or toner cartridges are properly installed in the printer. Open the printer’s access door and verify that the cartridges are securely seated in their designated slots.

Replace Cartridges: If the printer displays Error Code 30 after installing new cartridges, it’s possible that the cartridges are defective or not recognized by the printer. Try replacing the cartridges with genuine HP cartridges that are compatible with your printer model.

Clean Cartridge Contacts: Over time, the metal contacts on the ink or toner cartridges and inside the printer can become dirty or dusty, leading to connection issues. Turn off the printer and carefully clean the cartridge contacts and corresponding contacts inside the printer using a soft, lint-free cloth.

Reset the Printer: Turn off the printer, unplug it from the power source, and wait for about 30 seconds. Plug the printer back in and turn it on. Performing a reset can often clear temporary issues and error messages.

HP Printer Technical Support UK

Update Printer Firmware: Outdated printer firmware can sometimes cause error codes. Check HP’s official website for any available firmware updates for your printer model. Download and install the latest firmware following the manufacturer’s instructions.

Run Print Head Cleaning: If your printer uses ink cartridges, it’s possible that the print head might be clogged, leading to Error Code 30. Check your printer’s manual or the HP website for instructions on how to run a print head cleaning cycle.

Contact HP Support: If the error persists after trying the above steps, or if you are unsure about any troubleshooting procedure, it’s best to contact HP customer support or seek assistance from a qualified technician. They can provide further guidance and help resolve the issue.

Keep in mind that the exact steps to resolve HP Printer Error Code 30 may vary depending on your printer model and specific circumstances. Always refer to the printer’s manual or HP’s official support resources for accurate troubleshooting steps.

7Aug, 2023

HP Printer Error Code 79

HP Printer Error Code 79 is a common error that occurs on HP printers. It typically indicates a firmware-related problem, network communication issue, or a corrupted print job. Here are some steps you can take to troubleshoot and resolve the error:

Power Cycle the Printer: Turn off the printer and unplug it from the power source. Wait for about 30 seconds and then plug it back in. Turn on the printer and check if the error persists.

Check the Printer’s Connections: Ensure that the printer is properly connected to your computer or network. If it’s a network printer, make sure the network cables are securely connected, or check the wireless connection.

HP Printer Technical Support London

Update Printer Firmware: Outdated firmware can cause the error code 79. Check HP’s official website for any available firmware updates for your printer model. Download and install the latest firmware following the manufacturer’s instructions.

Clear the Print Queue: Corrupted print jobs in the print queue can trigger error code 79. Open the print queue on your computer and delete all pending print jobs.

Remove and Reinstall Printer Drivers: Faulty printer drivers can also lead to this error. Remove the existing printer drivers from your computer and reinstall the latest drivers from HP’s website.

Perform a Cold Reset: A cold reset can sometimes help in resolving firmware-related issues. The procedure varies depending on your specific printer model. Refer to the printer’s manual or HP’s support website for instructions on how to perform a cold reset.

Disconnect Additional Accessories: If your printer has additional accessories, such as extra trays or memory modules, try disconnecting them temporarily and see if the error persists. Sometimes, faulty accessories can trigger error codes.

Please note that the steps mentioned above are general troubleshooting suggestions for HP Printer Error Code 79. The exact resolution may vary depending on your printer model and specific circumstances. If you are uncertain about any step or encounter any difficulties, it’s best to seek assistance from HP support or a qualified professional.

7Aug, 2023

How do I fix print queue problems?

Fix print queue problems can be done by following these steps:

Cancel All Print Jobs: The first step is to cancel all print jobs in the queue. Open the print queue on your computer and delete all pending print jobs. This will clear the queue and remove any stuck or corrupted print jobs.

Restart the Printer: Turn off the printer and unplug it from the power source. Wait for about 30 seconds and then plug it back in or turn it on. This will help reset the printer’s internal settings and clear any temporary issues.

Restart the Computer: Sometimes, print queue problems can be caused by issues with the computer’s print spooler service. Restart your computer to refresh the print spooler and resolve any related issues.

Check Printer Connections: Ensure that your printer is properly connected to your computer or network. If it’s a wireless printer, make sure it is connected to the correct Wi-Fi network. Verify the printer’s physical connections and try printing a test page to check if it responds.

Update Printer Drivers: Outdated or incompatible printer drivers can lead to print queue problems. Visit the manufacturer’s website (in this case, HP) and download the latest drivers for your printer model. Install the updated drivers on your computer to ensure compatibility.

Clear the Print Spooler: Sometimes, print jobs can get stuck in the print spooler, causing queue problems.

To clear the print spooler, follow these steps:

a. Press the Windows key + R to open the Run dialog box.
b. Type “services.msc” and press Enter to open the Services window.
c. Scroll down to find “Print Spooler” in the list of services.
d. Right-click on “Print Spooler” and select “Stop.”
e. Once it stops, navigate to C:\Windows\System32\spool\PRINTERS.
f. Delete all files in the PRINTERS folder.
g. Go back to the Services window, right-click on “Print Spooler” again, and select “Start.”

Disable Advanced Printing Features: In some cases, disabling advanced printing features can resolve print queue problems. To do this, go to the printer’s properties on your computer, navigate to the “Advanced” tab, and uncheck the option for “Enable advanced printing features.”

Use Troubleshooter: Windows and macOS have built-in print troubleshooters that can help identify and fix common printing issues. Run the print troubleshooter from the Control Panel (Windows) or System Preferences (macOS).

Reset the Printer: If none of the above steps work, consider resetting the printer to its factory settings. Refer to the printer’s manual or the manufacturer’s website for instructions on how to perform a factory reset.

If you have tried all these steps and the print queue problems persist, it’s advisable to contact HP Printer support or seek assistance from a professional technician to diagnose and fix any hardware-related issues.

Tag Archives: printer connect to Wi-Fi

Read Also: What is error 13 A2 D2 on HP printer?

To troubleshoot the issue, I recommend the following steps:

To address these common issues, you can try the following troubleshooting steps:

Error Code 30

To clear the print spooler, follow these steps: