• Search for:
    printer technical support
    25Jul, 2023
    What is printer error code 13.03 01?

    Error code “13.03.01” on a printer typically indicates a paper jam or a paper-related issue within the printer. The specific error code format may vary depending on the printer manufacturer and model, but generally, it refers to a specific problem related to the printer’s paper path.

    printer technical support

    To troubleshoot and resolve the “13.03.01” error on your printer, follow these general steps:

    Check for Paper Jams:

    Open all printer access doors and trays to visually inspect for any paper jams. If you find any paper stuck in the printer, carefully remove it following the printer’s instructions. Make sure to turn off the printer and unplug it before attempting to remove any paper jams to avoid potential injury.

    Clear Paper Path:

    Even if you don’t see any paper jams, debris or small pieces of torn paper might be causing the error. Use a flashlight to carefully inspect the paper path and remove any debris or torn paper that you find.

    Verify Paper Size and Type Settings:

    Ensure that the paper loaded in the printer matches the paper size and type settings configured in the printer’s control panel or print settings on your computer.

    Reload Paper Properly:

    Make sure the paper is loaded correctly in the paper tray or input tray, and it is not bent, curled, or damaged.

    Clean the Paper Feed Rollers:

    Over time, paper dust and debris can accumulate on the paper feed rollers, leading to feeding issues. Use a lint-free cloth lightly moistened with water to clean the rollers.

    Perform a Printer Reset:

    Turn off the printer, unplug it from the power source, and wait for about 30 seconds. Then, plug it back in and turn it on again. This simple reset can sometimes clear the error.

    Update Firmware and Drivers:

    Error code 13.03 01, Visit the printer manufacturer’s website and check for any available firmware or driver updates for your printer model. Updating the printer’s firmware and drivers can sometimes resolve issues.
    If the “13.03.01” error persists despite trying the above steps, it’s possible that there may be a hardware issue with the printer’s paper feed mechanism or sensor. In such cases, it’s best to contact the printer manufacturer’s support or visit an authorized service center for further assistance and potential repairs.

    printer technical support
    25Jul, 2023
    What is printer error 0x00000705?

    Printer error 0x00000705 is a common error that can occur on Windows computers when trying to set a default printer or change printer settings. This error is typically associated with issues related to printer permissions or conflicts with the Windows print spooler service.

    printer technical support

    When the error occurs, you might see a message similar to “Operation could not be completed (error 0x00000705). Access is denied.”

    To troubleshoot and resolve the printer error 0x00000705, follow these steps:

    Run Printer Troubleshooter:

    Windows includes a built-in printer troubleshooter that can automatically detect and fix common printing problems. Run the troubleshooter to see if it can resolve the error.
    To access the troubleshooter, go to Settings > Update & Security > Troubleshoot > Additional troubleshooters > Printer > Run the troubleshooter.

    Check Printer Permissions:

    Ensure that you have the necessary permissions to manage printers on your computer. You might need administrative rights to set a default printer or make changes to printer settings.
    To check your user permissions, go to Settings > Accounts > Family & other users (or Other users) and verify that your account has administrative privileges.

    Restart Printer and Computer:

    Turn off your printer and computer. Wait for a few seconds, then turn them back on. This can clear any temporary glitches that might be causing the error.

    Clear Print Spooler:

    Clearing the print spooler can often resolve print queue issues. Here’s how to do it:
    a. Press the Windows key + R to open the Run dialog box.
    b. Type “services.msc” and press Enter to open the Services window.
    c. In the Services window, locate the “Print Spooler” service.
    d. Right-click on “Print Spooler” and select “Stop.”
    e. Once the service has stopped, open File Explorer and navigate to “C:\Windows\System32\spool\PRINTERS” (you may need administrator privileges to access this folder).
    f. Delete all the files in the “PRINTERS” folder.
    g. Go back to the Services window, right-click on “Print Spooler,” and select “Start.”
    h. Try setting the default printer or making changes to printer settings again.

    Reinstall Printer Drivers:

    If you suspect driver corruption, consider uninstalling and reinstalling the printer drivers.
    Open the “Devices and Printers” window (you can search for it in the Start menu).
    Right-click on your printer and select “Remove Device.”
    Download the latest drivers from the printer manufacturer’s website and follow the installation instructions.
    If the error persists after trying the above steps, there may be other underlying issues, such as more complex printer permission conflicts or driver problems. In such cases, consider reaching out to the printer manufacturer’s support or a qualified technician for further assistance.

    printer technical support
    25Jul, 2023
    What is printer error 0x00000015?

    The printer error code “0x00000015” is a common error that can occur on Windows computers when trying to print. This error is often associated with printer driver issues or conflicts with the Windows print spooler service. When the error occurs, it can prevent you from printing documents and may display an error message similar to “Operation could not be completed (error 0x00000015). The device is not ready.”

    printer technical support

    To troubleshoot and resolve the printer error 0x00000015, follow these steps:

    Restart Printer and Computer:

    Turn off your printer and computer. Wait for a few seconds, then turn them back on. This can clear any temporary glitches that might be causing the error.

    Clear Print Spooler:

    The print spooler is a Windows service that manages print jobs. Clearing the print spooler can often resolve print queue issues. Here’s how to do it:
    a. Press the Windows key + R to open the Run dialog box.
    b. Type “services.msc” and press Enter to open the Services window.
    c. In the Services window, locate the “Print Spooler” service.
    d. Right-click on “Print Spooler” and select “Stop.”
    e. Once the service has stopped, open File Explorer and navigate to “C:\Windows\System32\spool\PRINTERS” (you may need administrator privileges to access this folder).
    f. Delete all the files in the “PRINTERS” folder.
    g. Go back to the Services window, right-click on “Print Spooler,” and select “Start.”
    h. Try printing again to see if the error is resolved.

    Check Printer Drivers:

    Ensure that you have the latest and correct printer drivers installed for your printer model. Outdated or incompatible drivers can cause various printing issues.
    Visit the printer manufacturer’s website or use Windows Update to check for driver updates.

    Reinstall Printer Drivers:

    If you suspect driver corruption, consider uninstalling and reinstalling the printer drivers.
    Open the “Devices and Printers” window (you can search for it in the Start menu).
    Right-click on your printer and select “Remove Device.”
    Download the latest drivers from the printer manufacturer’s website and follow the installation instructions.

    Run Printer Troubleshooter:

    Windows includes a built-in printer troubleshooter that can automatically detect and fix common printing problems. Run the troubleshooter to see if it can resolve the error.
    To access the troubleshooter, go to Settings > Update & Security > Troubleshoot > Additional troubleshooters > Printer > Run the troubleshooter.

    Check Printer Status:

    Ensure that the printer is turned on, connected to your computer or network, and not displaying any error messages or warning lights.
    If the error persists after trying the above steps, there may be other underlying issues, such as hardware problems or more complex driver conflicts. In such cases, consider reaching out to the printer manufacturer’s support or a qualified technician for further assistance.

    HP support UK
    25Jul, 2023
    How do I reset my Epson printer?

    To reset an Epson printer, you can use the printer’s control panel or software utility. The exact steps may vary depending on your printer model, so I’ll provide you with general instructions. Before proceeding, ensure that you have any necessary setup information and that you’re prepare to reconfigure your printer settings after the reset.

    HP support UK

    Soft Reset (via Control Panel):

    A soft reset can help resolve minor issues and errors. This process will restart the printer without affecting its settings or data.

    • Make sure your printer is turn on.
    • Press and hold the power button for a few seconds until the printer turns off.
    • Wait for about 10-15 seconds.
    • Press the power button again to turn on the printer.
    • The printer should start up as if it were just turn on, and any temporary issues might be resolve.

    Factory Reset (via Control Panel):

    A factory reset will restore the printer to its original default settings. This type of reset should be use with caution, as it will erase all custom settings, network configurations, and any stored data.

    • Ensure that the printer is turn on.
    • Access the printer’s control panel menu or settings.
    • Look for an option related to “Reset,” “Restore Factory Settings,” or “Factory Reset.” The exact wording may vary based on your printer model.
    • Select the factory reset option and follow the on-screen prompts to confirm the reset.
    • The printer will restart, and all settings will be restore to their default values.

    Software Reset (Epson Adjustment Program):

    Some Epson printers can be reset using a software utility called the Epson Adjustment Program. This method is often used for more advanced resets or to reset ink pad counters on certain Epson printer models. However, please note that using third-party software may void your printer’s warranty or have other implications, so proceed with caution.

    If you choose to use the Epson Adjustment Program, you can find it online by searching for your specific printer model and the term “Adjustment Program” or “Waste Ink Pad Reset.”

    Epson Printer Support Phone Number

    Remember that performing a factory reset will remove any custom settings, and you will need to set up the printer again, including connecting it to your network (if it’s a wireless printer). Before proceeding with any reset, make sure to back up any essential settings or configurations you want to retain.

    For detailed instructions and model-specific information, refer to your printer’s user manual or visit Epson’s official support website.

    printer technical support
    24Jul, 2023
    What is E2 error on HP printer?

    The “E2” error on an HP printer is typically an indication that there is a paper jam or a paper-related issue. The specific error message might vary slightly depending on the HP printer model, but it generally signifies a problem with the paper feed or paper path. When the printer detects an obstruction in the paper path, it triggers the “E2” error to alert the user.

    printer technical support

    To resolve the “E2” error on your HP printer, follow these steps:

    Check for Paper Jams: Open all the access doors and trays of the printer to visually inspect for any jammed paper. If you find any paper stuck in the printer, carefully remove it following the printer’s instructions. Make sure to turn off the printer and unplug it before attempting to remove any paper jams to avoid potential injury.

    Clear the Paper Path: Even if you don’t see any paper jams, debris or small pieces of torn paper might be causing the error. Use a flashlight to carefully inspect the paper path and remove any debris or torn paper that you find.

    Reset the Printer: Turn off the printer, unplug it from the power source, and wait for about 30 seconds. Then, plug it back in and turn it on again. This simple reset can sometimes clear the error.

    HP Printer Technical Support London

    Verify Paper Size and Type Settings: Ensure that the paper loaded in the printer matches the paper size and type settings configured in the printer’s control panel or print settings on your computer.

    Reload Paper Properly: Make sure the paper is loaded correctly in the paper tray or input tray, and it is not bent, curled, or damaged.

    Clean the Paper Feed Rollers: Over time, paper dust and debris can accumulate on the paper feed rollers, leading to feeding issues. Use a lint-free cloth lightly moistened with water to clean the rollers.

    Update Firmware and Drivers: Visit the HP support website and check for any available firmware or driver updates for your printer model. Updating the printer’s firmware and drivers can sometimes resolve issues.

    If the “E2” error persists despite trying the above steps, it’s possible that there may be a hardware issue with the printer’s paper feed mechanism or sensor. In such cases, it’s best to contact HP customer support or visit an authorized service center for further assistance and potential repairs.

    printer technical support
    24Jul, 2023
    What is error code E0 on HP printer?

    Error code “E0” that is universally associated with HP printers. Error codes can vary depending on the printer model and the specific issue or problem encountered.

    If you are seeing an “E0” error code on your HP printer, it might be specific to your particular printer model or a relatively rare issue. To troubleshoot the error and find a resolution, follow these general steps:

    printer technical support

    Error code E0

    Refer to the Printer Manual: Check your printer’s user manual or documentation for a list of error codes and their meanings. The manual should provide guidance on how to resolve specific error codes.

    Restart the Printer: Turn off the printer, wait for a few seconds, and then turn it back on. This can help clear any temporary glitches.

    Check for Paper Jams: Open all printer access doors and check for any paper jams. If you find any jammed paper, carefully remove it following the printer’s instructions.

    Verify Connections: Ensure that all cables (USB, power) are securely connected to the printer and your computer (if applicable).

    Update Firmware and Drivers: Visit the HP support website and check for any available firmware or driver updates for your printer model. Updating the printer’s firmware and drivers can sometimes resolve issues.

    Perform a Printer Reset: If the error persists, try performing a printer reset. The method to reset your printer may vary based on the model, so refer to the user manual for instructions.

    Contact HP Support: If none of the above steps resolves the error, or if you are unsure about the cause of the error, it’s best to contact HP printer support or visit an authorized service center for assistance.

    Keep in mind that specific error codes and troubleshooting steps can change over time with firmware updates and model changes. Therefore, it’s essential to refer to the most up-to-date information provided by HP for your specific printer model. Visit HP’s official support website or contact their customer support for the latest troubleshooting guidance related to your HP printer.

    printer technical support
    23Jul, 2023
    How do I troubleshoot a printer error?

    Troubleshooting a printer error can vary depending on the specific error message or issue you encounter. However, here is a general step-by-step guide to help you troubleshoot common printer problems:

    printer technical support

    Check Printer Power and Connections:

    • Ensure that the printer is powered on and connected to a power source.
    • If your printer is connected via a USB cable, verify that the cable is securely connected to both the printer and your computer.
    • If your printer is connected wirelessly, check that it is connected to the correct Wi-Fi network.

    Review Printer Display or Error Lights:

    Check the printer’s display panel or error lights for any error messages or warnings. If there are any, note down the message or code, as it can provide valuable information for troubleshooting.

    Cancel Pending Print Jobs:

    If your printer is not responding, there may be a stuck print job in the queue. Access the printer queue on your computer and cancel any pending print jobs.

    Restart Printer and Computer:

    Turn off your printer and computer. Wait for a few seconds, then turn them back on. Restarting can resolve temporary glitches.

    Update Printer Drivers:

    Outdated or corrupted printer drivers can cause communication problems. Visit the printer manufacturer’s website and download the latest drivers for your printer model.

    Check for Paper Jams:

    Paper jams are a common issue. Open the printer’s access doors and check for any paper stuck inside. If there’s a paper jam, carefully remove the paper following the printer’s instructions.

    Verify Printer Settings:

    Review the printer’s settings to ensure they are configured correctly. Pay attention to paper size, print quality, and other relevant settings.

    Perform a Test Print:

    Use the printer’s self-test or diagnostic page printing function to check if the printer can produce output internally. This helps verify if the issue is with the printer error or the computer.

    Clear Print Spooler (Windows only):

    If you’re using a Windows computer, clear the print spooler to resolve print queue issues. Open the Services app (search for “services.msc” in the Start menu), locate “Print Spooler,” right-click on it, and choose “Stop.” Afterward, delete the files in the “C:\Windows\System32\spool\PRINTERS” folder. Finally, restart the Print Spooler service.

    Run Printer Troubleshooting Tools:

    Both Windows and macOS have built-in printer troubleshooting tools. Access them from the Control Panel (Windows) or System Preferences (macOS) to diagnose and fix common printer problems.

    Consult Printer Manual or Online Support:

    If the error persists, refer to your printer’s user manual for specific troubleshooting instructions.
    You can also visit the printer manufacturer’s support website or contact their printer support london for further assistance.
    Remember that troubleshooting steps may vary depending on your printer model, operating system, and the specific error you encounter. Always consult your printer’s user manual or the manufacturer’s support resources for model-specific troubleshooting guidance.

    wireless printer
    23Jul, 2023
    Why is my printer offline and not connecting?

    If your printer is offline and not connecting, there can be several reasons for this issue. Below are some common causes and troubleshooting steps to help you resolve the problem:

    wireless printer

    Network Connectivity:

    Check if your printer is connected to the same Wi-Fi network as your computer or the network it’s intended to be used on. If there are connectivity issues with the network, the printer will appear offline.

    Printer Power and Status:

    Ensure that the printer is power on and not displaying any error messages or warning lights that could prevent it from connecting.

    USB Connection Issues:

    If your printer is connect to your computer via a USB cable, check if the cable is securely connect to both the printer and the computer.

    Printer Queue and Pending Print Jobs:

    Check the printer queue on your computer to see if there are any pending print jobs. If there are, try clearing the queue and resuming printing.

    Printer Driver Issues:

    Outdated or corrupted printer drivers can sometimes cause communication problems between the computer and the printer. Ensure you have the latest printer drivers installed for your printer model.

    Software or Firewall Interference:

    Check if any antivirus or firewall software on your computer is blocking communication with the printer. Temporarily disabling such software can help diagnose the issue.

    Network Issues:

    If the printer is connect over a network, verify that the network is functioning correctly, and other devices can connect to it without any problems.

    Printer Offline Setting:

    In some cases, the printer might be set to offline mode manually. Check your printer’s settings to ensure it is set to “online” or “ready” mode.

    Printer Sleep or Power-Saving Mode:

    If the printer is in sleep or power-saving mode, waking it up may re-establish the connection.

    IP Address Conflict:

    Ensure that the printer’s IP address does not conflict with other devices on the network. Assigning a static IP address to the printer can help avoid conflicts.

    Restart Devices:

    Try restarting both your computer and the printer to clear any temporary glitches. Printer Technical Support London
    If you have checked the above points and the printer is still shown as offline and not connecting. It’s possible that there may be a more significant issue with the printer’s hardware or settings. In such cases, you may want to refer to your printer’s user manual for specific troubleshooting steps or contact the printer manufacturer’s support for further assistance.

    HP support UK
    23Jul, 2023
    Why won’t my printer connect to Wi-Fi anymore?

    If your printer won’t connect to Wi-Fi anymore, there can be several reasons behind the issue. Here are some common causes and troubleshooting steps to help you resolve the problem:

    HP support UK

    Network Connectivity:

    Check if your Wi-Fi network is functioning correctly and if other devices can connect to it without any issues. If your network is down or experiencing problems, your printer won’t be able to connect.

    Weak Wi-Fi Signal:

    Ensure that your printer is within the range of your Wi-Fi router. Weak Wi-Fi signals can lead to connectivity problems.

    Changed Network Settings:

    If you recently changed your Wi-Fi network’s name (SSID) or password, the printer may still be trying to connect with the old settings. You will need to update the network information on the printer.

    Network Interference:

    Other electronic devices, cordless phones, microwave ovens, or neighboring networks operating on the same frequency can cause interference with your printer’s Wi-Fi connection.

    Firmware Issues:

    Check for firmware updates for your printer model. Outdated firmware can sometimes cause connectivity problems. Visit the printer manufacturer’s website for any available updates.

    IP Address Conflict:

    Verify that the printer’s IP address does not conflict with other devices on the network. Assigning a static IP address to the printer can help avoid conflicts.

    Printer Settings:

    Review your printer’s network settings to ensure it is set up to connect to the correct Wi-Fi network.

    Antivirus/Firewall Interference:

    Temporarily disable any antivirus or firewall software on your computer or printer. Sometimes, these security programs can interfere with the printer’s communication.

    Restart Devices:

    Power off both your printer and Wi-Fi router. Wait for a few seconds, and then power them back on. This can resolve temporary glitches.

    Factory Reset (as a last resort):

    If all else fails, you can perform a factory reset on your printer. However, keep in mind that this will erase all custom settings, and you’ll need to set up the printer again from scratch.
    If none of the above troubleshooting steps resolve the issue, Printer Technical Support London it’s possible that there may be a hardware problem with your printer’s Wi-Fi adapter or other components. In such cases, it’s recommended to contact the printer manufacturer’s support or visit an authorized service center for further assistance and potential repairs.

    wireless printer
    22Jul, 2023
    Why my computer says my printer is offline?

    If your computer says your printer is offline, it means that the computer is unable to communicate with the printer over the network or through the USB connection. There are several reasons why your computer might indicate that the printer is offline:

    wireless printer

    Connectivity Issues:

    • If your printer is connect to your computer via a USB cable, make sure the cable is securely connect to both the printer and the computer.
    • If your printer is connect wirelessly, check the Wi-Fi or network connection to ensure the printer and the computer are on the same network.

    Printer Power and Status:

    Ensure that the printer is power on and not displaying any error messages or warning lights that could prevent it from printing.

    Printer Queue and Pending Print Jobs:

    Check the printer queue on your computer to see if there are any pending print jobs. If there are, try clearing the queue and resuming printing.

    Printer Driver Issues:

    Outdated or corrupted printer drivers can sometimes cause communication problems between the computer and the printer. Ensure you have the latest printer drivers installed for your printer model.

    Software or Firewall Interference:

    Check if any antivirus or firewall software on your computer is blocking communication with the printer. Temporarily disabling such software can help diagnose the issue.

    Network Issues:

    If the printer is connect over a network, verify that the network is functioning correctly and that other devices can connect to it without any problems.

    Printer Offline Setting:

    In some cases, the printer might be set to offline mode manually. Check your printer’s settings to ensure it is set to “online” or “ready” mode.

    Printer Sleep or Power-Saving Mode:

    If the printer is in sleep or power-saving mode, waking it up may re-establish the connection.

    IP Address Conflict:

    Ensure that the printer’s IP address does not conflict with other devices on the network. Assigning a static IP address to the printer can help avoid conflicts.

    Restart Devices:

    Try restarting both your computer and the printer to clear any temporary glitches.
    If you have checked the above points and the printer is still shown as offline, it’s possible that there may be a more significant issue with the printer’s hardware or network settings. In such cases, you may want to refer to your printer’s user manual for specific troubleshooting steps or contact the printer manufacturer’s support for further assistance.